Bake, cutter, steam convey, you will find any kinds of food machines from our selections.

Main drive
Main drive consists of geared motor, cross shaft and reduction gear. Since the reduction is applied on the final drive shaft, the drive system is so simple and does not generate noise.
Auto-tensioner keeps the tension of the drive chain constant. Proximity switch detects breakage of the chain and stops the machine.
Easy adjustment of proofing time due to the inverter-driven main motor. (Handling capacity varies in accordance with the proofing time.)

Tray
As products go below the supporting points of the comb-shaped tray, the structure is stable. The tray is made of stainless steel and will not rust.
Tray chain rail will be less worn because it sustains only the chain weight; tray weight is sustained by the 2 rollers on both sides.

Loader
Loader conveyor has two speeds; products are fed in at high speed, and the speed is changed to low right before hitting the stopper, located at the end of the loading conveyor, to stop softly.
Since a flat and smooth plastic belt is applied for the loader conveyor, it does not make noise during operation, and the bottom of baking tins will not wear down.
A group of products in the baking tins are pushed to the comb-shaped table by the pusher after sensors check safety of the area. The comb-shaped tray scoops up the baking tins on the comb-shaped table, thus smooth and stable loading.

Unloader
Unloader works in the reverse order of the loader. In case a photoelectric switch detects some baking tins remaining on the comb-shaped table when the next group of products are coming down from the tray, the machine will stop.
In addition, the comb-shaped table is designed to escape by means of a spring. So there will be no further damage to the baking tins or the tray.

Pusher
Pusher is driven by a geared motor.
It moves slowly when pushing baking tins and quickly when returning by means of a crank motion mechanism; will not cause damage to the dough.

Others
- Automatic tension adjustment for the take-up section of the tray chain by means of a spring.
- When a limit switch detects stretch of the chain, it informs you with alarm of the time for maintenance. In case of emergency stop, the display of Error Codes on the panel indicates the position of the fault.
- The main motor is equipped with Shock Monitor, which facilitates accurate fault detection by measuring electric power, thus minimizes damages of an accident.
- Products never go under the conveyor or comb-shaped table; machine structure eliminates a cause of contamination.
- Easy lubrication by using Automatic Lubrication Unit (optional). It injects only the necessary amount of oil.